home *** CD-ROM | disk | FTP | other *** search
- Path: news.sinet.slb.com!usenet
- From: bar@canuck.englewood.geoquest.slb.com (Bernhard A. Rieckhoff)
- Newsgroups: comp.sys.amiga.emulations
- Subject: Re: Shapeshifter Help
- Date: 27 Mar 1996 16:46:54 GMT
- Organization: Schlumberger
- Message-ID: <4jbrdu$320@ohnasn01.sinet.slb.com>
- References: <4j6mg3$1k2@news.asiapac.net> <DowwzL.3n@iglou.com>
- NNTP-Posting-Host: 163.185.53.83
- X-Newsreader: knews 0.9.3
-
- In article <DowwzL.3n@iglou.com>,
- sledford@iglou.iglou.com (Steve L. Edford) writes:
- >ananias@asiapac.net (The Chink) writes:
- >
- >>Hi! Can anyone help me out with Shapeshifter. Sorry if this question
-
- SNIP...
-
- >While I'm not real familiar with IDE, I would suspect it might be the
- >roadblock. I believe ShapeShifter only works with SCSI, but I could be
-
- SNIP...
-
- I doubt it, I am using SS on an IDE drive in an A1200 and don't have this
- problem. I just sent in the reg. fee and am hoping that it will continue
- to work as well on my SquirrelSCSI mounted disk partition that I've prepared
- for it.
-
- I've had trouble booting from some floppies, either the mad mac or an endlessly
- flashing happy mac and sometimes a guru. I suggest you get hold of the
- SSBootFile.lha (a bootable 7.0.1 filedisk) and proceed from there.
- I still use that file as an emergency backup if I need to do file repair etc.
- --
- PLEASE REPLY TO: brieckhoff@houston.geoquest.slb.com
- Bernhard Rieckhoff Sr. Geophysicist, Schlumberger-GeoQuest
- Denver, CO USA Voice (303) 486-3204 FAX (303) 694-4690
- *Opinions expressed here are unlikely to reflect those of my employer*
-
-